Audio Output Options On The Rx8000 - Ericsson RX8000 Reference Manual

Using the Equipment
 = Option
Basic Audio
Decoder
Advanced
Audio
Decoder
By default, the RX8200 provides two Advanced Audio Decoders but can provide
additional audio decoders depending on configuration setup and whether the
RX8200/SWO/4AUD license option is enabled.
The RX8300 is limited to having two Basic Audio Decoders.
3.14.2

Audio Output Options on the RX8000

Audio that is decoded or pass-thru by the RX8000 can be embedded with the video
in to the SDI output as digital AES3. AES3 (also known as AES/EBU) is the
standard used to transport digital audio signals between professional equipment.
The RX8000 is also fitted with Audio Output connectors that each provide balanced
analogue left and right channels as well as a digital AES3 output. By default, all
units are fitted with two Audio Output connectors that are mapped to two audio
decoders.
The RX8200 has the option of supporting up to four Audio Output connectors but an
additional Audio Output card must be fitted to facilitate this.
 = Option
Two Audio Output
Connectors
Four Audio Output
Connectors
Each Audio Output connector uses a DE9 connector and a break-out cable is
available to provide XLR terminals. The pin-out for the DE9 connector is described
in a later section.
3-238
B = Supplied with Base Model
B
 
B B
B = Supplied with Base Model
B B
 
B B B B
B B B B
B B
B B B
EN/LZT 790 0005 R7A