Installing the Equipment
2.3.3
IP IN Connector (RX8200 only)
Units can provide two input Ethernet data interfaces.
Table 2.2
Item
Connector type
Connector designation
Pin-outs
2.3.4
G.703 Connector (RX8200 only)
The unit provides a single G.703 input connector.
Table 2.3
Item
Connector type
Connector designation
Pin-outs
2.3.5
DVB-T2 (OFDM) Connector (RX8200 only)
The unit provides a single DVB-T2 input connector.
Table 2.4
Item
Connector type
Connector designation
Pin-outs
2-6
IP IN Connector
Specification
RJ-45 (100BaseT)
IP IN 1
IP IN 2
Pin 1 – Tx Out (+)
Pin 2 – Tx Out (-)
Pin 3 – Rx In (+)
Pin 4 – CMT
Pin 5 – CMT
Pin 6 – Rx In (-)
Pin 7 – CMT
Pin 8 – CMT
G.703 Connector
Specification
BNC 75 Ω female socket
G.703 E3/DS-3
Centre
Input
Shield
Ground/Chassis
T2 Connector
Specification
F-Type 75 Ω female socket
DVB-T/T2
Centre
Input
Shield
Ground/Chassis
IP IN
G.703 IN
T2 IN
EN/LZT 790 0005 R7A