Table of Contents
Advertisement
3.17.6.6.12
IP Out Link 2 > Link Status
This status field reports the link status of the port. MPE is a connectionless
broadcast so the link status does not indicate if the IP contents of the MPE packets
have been successfully received.
•
•
•
•
3.17.6.7
Front Panel Setup
3.17.6.7.1
Component Selection
This menu allows the user to select the desired MPE component for the list.
Once Edit is selected use the (Up) and (Down) keys to toggle the MPE
components within the service and the USER PID and NO SELECTION options.
3.17.6.7.2
Filter MAC / User PID
This menu allows the user to select either a MAC address to filter on or a user PID
to use when the MPE component selection is set to USER.
Once Edit is selected Use the (Back) and (Forward) keys to toggle between
FILTER MAC and USER PID.
Use the (Up) and (Down) keys to increment each element in the MAC address
and increment or decrement the USER PID value.
3.17.6.7.3
Component Selection
This menu allows the user to turn MPE de-encapsulation either off or on.
EN/LZT 790 0005 R7A
10 Mb
100 Mb
1000 Mb
Down
SERVICE
4.9.1
SERVICE
4.9.2
SERVICE
4.9.3
|COMPONENT SELECTION
|NO SELECTION
|FILTER MAC: 00:00:00:00:00:00
|USER PID:
0000
|MPE ENABLE: ENABLE
|
Using the Equipment
3-329
Advertisement
Table of Contents
