Table of Contents
Advertisement
•
•
•
•
The fail mode screens will be displayed at the same standard of the previously
decoded video or as configured by the Default Output Standard option.
3.13.8.5.1
1080P Support
When 1080P50/60 video is being output, there are restrictions on the Video Fail
Mode displayed.
If 75% Bars and Red is selected, the output will be 100% Bars instead.
For the Blue+Text, Red+Text or Black+Text selections, no text will be shown.
3.13.8.6
Front Panel Setup
3.13.8.6.1
Video Fail Mode
This menu allows the user to select the desired video fail mode
Once Edit is selected use the (Up) and (Down) keys to toggle between the fail
modes described above.
3.13.9
Frame Sync
3.13.9.1
Availability
= Option
Frame Sync
EN/LZT 790 0005 R7A
Red + Text – This is the same as Blue + Text but contains a full field standard
red rather than blue. Not supported for 1080P50/60 output.
Black + Text – This is the same as Blue + Text but contains a full field black
rather than blue. Not supported for 1080P50/60 output.
No Syncs – Both Digital (SDI) and Analogue (CVBS) outputs have their video
sync signals disabled. Only supported if the RX8200/HWO/HD or
RX8200/HWO/HD/3G option is fitted.
No DigSyncs – Only Digital (SDI) output has its sync signal disabled. The
Analogue (CVBS) output will still output video sync signal (Freeze Frame). Only
supported if the RX8200/HWO/HD or RX8200/HWO/HD/3G option is fitted.
SERVICE
4.2
B = Supplied with Base Model
|VIDEO FAIL MODE
|FREEZE FRAME
Using the Equipment
3-233
Advertisement
Table of Contents
