Figure 1.9 Rear Panel (Rx8305); Table 1.15 Rear Panels - Ericsson RX8000 Reference Manual

RF IN
ASI OUT 1-2 CVBS

Figure 1.9 Rear Panel (RX8305)

Table 1.15 Rear Panels

Item
RF IN 1-4
ASI OUT 1-2
ASI/SDI OUT
ASI/HD-SDI/SD-SDI
OUT
ASI/3G-SDI/HD-
SDI/SD-SDI OUT
CVBS
ASI INPUT
SVGA OUTPUT
IP DATA 1-2
ETHERNET 1-2
CONTROL 1-2
ALARM
ALARM RELAY
AUDIO OUT 1-2
CA INTERFACE
AC POWER
TECHNICAL EARTH
EN/LZT 790 0005 R7A
ALARM ETHERNET 1-2
Type
F-type 75 Ω
BNC 75 Ω
BNC 75 Ω
BNC 75 Ω
15-way D-type
RJ-45
RJ-45
9-way D-type
9-way D-type
Card Slot
IEC
Spade terminal
AUDIO OUT 1-2
Description
Radio Frequency (L-band) input.
ASI = Asynchronous Serial Interface.
SDI = Serial Digital Interface.
SD-SDI = Standard Definition SDI.
HD-SDI = High Definition SDI.
3G-SDI = 2.970 Gbps serial link required for
1080P support.
Composite Video output.
Asynchronous Serial Interface input.
Streaming data format that carries the MPEG
Transport Stream.
Component Video output (RGB/HV (SVGA) or
YPrPb).
IP Output card supports 1000BaseT Ethernet
transmission of encapsulated transport stream
10-100BaseT control port for HTTP and FTP
control of the RX8000.
A summary ALARM relay provides contact
closure when the unit detects an alarm, or the
power is switched off.
Each connector carries a single channel of a
stereo pair in both analogue and balanced
digital form.
A single slot allows the insertion of a
Conditional Access Module (CAM) for
Common Interface support. On the RX8330C
this will be replaced with a smartcard slot.
100-240 V AC power input.
Unit earthing connector.
Introduction
TECHNICAL EARTH
1-19