Table of Contents
Advertisement
Using the Equipment
Figure 3.73 Customization Serial Number field
This is also available via menu number 5.2.3 of the front panel menu system.
This information must be supplied to the Director head-end operator and once
included in to the database, the unit can then receive commands and various
entitlement messages once locked on to the appropriate transport stream.
3.11.4.5.4
Receiver Control
Director Provides an over air "remote control" for the receiver. This is tailored for
broadcasters with DVB-S/S2 systems. This control allows the broadcaster to:
•
•
•
•
•
•
•
•
•
All of these messages are sent in the Transport Stream and can be addressed to an
individual receiver or a community of receivers. This is controlled by the Ericsson
Director Head-end. The unit must be tuned to the head-ends Transport Stream and
must in Over Air Control mode to respond to the majority of commands.
3-154
Set the unit into Over Air Control mode.
Download new unit code over air (perform software upgrade)
Set multiple DVB-S/S2 tuning parameters and switch to any of these sets of
parameters. These tuning parameters may also include a Service selection.
Send messages to the unit for display on its user interfaces.
Send finger print messages to be burnt on to the video output.
Customize unit features (download License keys).
Set the unit's aspect ratio.
Enable or disable front panel control.
Reboot the unit.
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
