Frame Rate; Resolution; Bit Rate - Ericsson RX8000 Reference Manual

Integrated receivers/decoders

Hide thumbs Also See for RX8000:

Table of Contents

Frame Rate

This menu allows the user to view the current input frame rate detected by the video

decoder. This will be the same as the output frame rate because the unit does not

support frame-rate conversion.

This can be any of the following values:

This menu allows the user to view the current input resolution detected by the video

decoder, this may not be the same as the output resolution depending upon up-

conversion and down-conversion settings.

This is read and displayed directly from the information of the incoming video

sequence header information, notably the horizontal_size and vertical_size fields. A

size of 0x0 means no video has been detected.

This menu allows the user to view the current video bit rate detected by the demux

process for the currently selected video stream.

EN/LZT 790 0005 R7A

0 (no video detected)

Using the Equipment