3.9.6.3
Save MIBs File
Figure 3.35 Extracting the MIB File
This enables the user to save the current running Management Information Base
(MIB) file. A zip file is downloadable from the unit which defines which variables
should be monitored for SNMP purposes. Details of the variables are not described
in this document. For more detailed information on SNMP remote control, contact
Ericsson AB.
Note: RX8000 units running an older version of the software may provide a zip of
3.9.6.4
Save Alarm Logs File
Figure 3.36 Extracting the Alarm Log File
This enables the user to save the current Alarm Logs file. Left-click on the link to
display the log in the web page (click the browser refresh button to return to the Web
Browser Interface). Right-click on the link and select the Save target as... option in
the displayed dialog to save as a file.
3.9.6.5
Save Splice Logs File
Figure 3.37 Extracting the Splice Log File
This enables the user to save the current Splice Logs file. Left-click on the link to
display the log in the web page (click the browser refresh button to return to the Web
Browser Interface). Right-click on the link and select the Save target as... option in
the displayed dialog to save as a file.
EN/LZT 790 0005 R7A
the MIB file that is password protected. In this case, password "Stoneham"
should be used.
Using the Equipment
3-57