Introduction
•
•
There are a number of variants of both the RX8200 and RX8300 with different
hardware and software capabilities based around these 2 hardware platforms, some
of these capabilities are shared between both platforms whereas some are unique
to the platform or model.
1.2.1.1
RX8000 Standard Base Features
•
•
•
•
•
•
•
•
•
•
Note: Video decoding and some audio formats are not available as standard
•
•
•
1.2.2
RX8200 Advanced Modular Receiver
Figure 1.1 RX8200 Advanced Modular Receiver
1-12
RX8300
RX8200
Full web server control via the 2 x 100 Mbps Ethernet control ports. This
contains support for system configuration, monitor and upgrade.
2-line x 40-character back-lit dot-matrix LCD user interface with pushbuttons for
Up, Down, Left, Right, Edit, and Save for front panel control.
SNMP monitoring via the 2 x 100 Mbps Ethernet control ports.
Status LED indicates input feed lock and general alarm conditions.
Alarm handling via single configurable alarm relay and a date and time stamped
alarm log.
1 x ASI Transport Stream input with 75 Ω BNC connector.
2 x ASI Transport Stream outputs with 75 Ω BNC connectors.
Composite output test patterns including multiburst and color bars
Simple local and remote unit software upgrade in the field.
Service (program) selection by Service Name or Service ID from a list of all the
available Services carried in the currently received input feed.
within the RX8000 and must be enabled via feature license keys.
40 x preset service and component selections can be stored and recalled.
Unit configurations can be saved, recalled and shared between units using
XML.
Unit SNMP MIB can be downloaded from the unit.
EN/LZT 790 0005 R7A