Table of Contents
Advertisement
Use the (Up) and (Down) keys to select the required number.
3.10.8.7.2
8VSB CTRL
This menu allows the enabling of Direct Frequency and the Auto Tune feature. By
enabling the Direct Frequency option the user can use the previous menu to enter
the 8VSB channel directly by frequency rather than channel number. Frequency of
the signal is with reference to the 8VSB pilot frequency.
3.10.8.7.3
Auto Tune
The Auto Tune functionality allows the unit to tune to a service based on a scan of
the current bandplan and the channel number
To access this menu from the above menu, press the (Down) key.
Use the (Forward) and (Back) keys to toggle between Direct Frequency and
Auto Tune. Use the (Up) and (Down) keys to toggle between the Enabled
and Disabled options.
3.10.8.7.4
Input
This parameter will indicate if the receiver is locked to the 8VSB signal or not. To
access this menu from the above menu, press the (Forward) key.
3.10.8.7.5
8VSB Signal Level
To further indicate the health status of the incoming the signal the receiver will
provide an estimation of the Signal to Noise ratio of the 8VSB signal.
To access this menu from the above menu, press the (Down) key.
Use the (Up) and (Down) keys to select the required number.
EN/LZT 790 0005 R7A
8VSB
3.2
8VSB CTRL
3.3
INPUT
3.1
8VSB
3.2
|CHANNEL 61
|FREQUENCY
|DIRECT FREQUENCY
|AUTO TUNE
|NO TS LOCK
|
|CHANNEL 61
|FREQUENCY
Using the Equipment
SNR
0.00dB
755.000 MHz
DISABLED
DISABLED
>
SNR
0.00dB
755.000 MHz
3-137
Advertisement
Table of Contents
