Snmp Enable; Fec Enable; Network Util 1 (Max Value); Mdi Delay Factor (Max Value) - Ericsson RX8000 Reference Manual

Use the  (Up),  (Down),  (Forward) and  (Back) keys to enter the level.
3.10.5.13.33

SNMP Enable

This menu allows the enabling of SNMP. To access this menu from the above
menu, press the  (Down) key.
Use the  (Up) and  (Down) keys to toggle between the Enable and Disable
options.
3.10.5.13.34

FEC Enable

This menu allows the enabling of Forward Error Correction (FEC). To access this
menu from the above menu, press the  (Down) key.
Use the  (Up) and  (Down) keys to toggle between the Enable and Disable
options.
3.10.5.13.35

Network Util 1 (Max Value)

This menu allows the viewing the maximum percentage network utilization for
Network 1. To access this menu from the above menu, press the  (Down) key.
3.10.5.13.36

MDI Delay Factor (Max Value)

This menu allows the viewing of the maximum MDI Delay
menu from the above menu, press the  (Down) key.
EN/LZT 790 0005 R7A
SETUP
3.2.4.1
SETUP
3.2.4.2
SETUP
3.2.4.3
SETUP
3.2.4.4
SETUP
3.2.4.6
|DE-JITTER BUFFER LEVEL
|00500
|SNMP ENABLE
|Disable
|FEC ENABLE
|Disable
|NETWORK UTIL 1 (MAX VALUE)
|100
|MDI DELAY FACTOR (MAX VALUE)
|50.000
Using the Equipment
Factor. To access this
3-95