Table of Contents
Advertisement
Using the Equipment
This function suppresses the automatic selection of Phase Aligned Audio mode. The
section 3.15.5 Channel Configuration: Phase Aligned Audio (PAA) describes the
behavior in more detail.
3.14.4.4
Decode > Advanced > Audio Decoders > Audio
Figure 3.113 Decode > Advanced > Audio Decoders > Audio Window
Depending on the RX8000 variant, a number of Advanced Audio Decoder sections
will be presented for advanced options.
3.14.4.4.1
Audio Decoder > User PID
The User PID field specifies the User PID value for a specific Audio Decoder and is
used in conjunction with the User Std value. The field accepts PID values between 0
and 8191. The User PID is selected from the main Audio Decoder PID selection list.
3.14.4.4.2
Audio Decoder > User Std
The User Std field specifies the User Coding Standard (or Audio Format type) for a
specific Audio Decoder and is used in conjunction with the User PID value. The
User Std is selected as part of the User PID from the main Audio Decoder PID
selection list. The table below lists the available User Coding Standards.
Table 3.26 User Coding Standards
User Std
Represented Audio Format or Coding Standard
MUS
MPEG-1 Audio Layer II or MPEG-2 Audio Layer II (sometimes called MUSICAM)
AC-3
Dolby Digital (AC-3)
E-AC-3
Dolby Digital Plus (DD+, E-AC-3 or Enhanced AC-3)
Linear
Linear PCM
AAC (ADTS)
Advancing Audio coding (AAC): Packaged in a streaming format called Audio Data
Transport Stream (ADTS)
AAC (LOAS)
Advancing Audio coding (AAC): Packaged in a streaming format called Low Overhead
Audio Stream (LOAS)
3-246
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
