Table of Contents
Advertisement
3.14.5.1.1.2
User PID / User STD
This menu enables the viewing and editing of User PID and User Coding Standard
(audio format) settings for the associated audio decoder.
Use the Edit key to modify the settings as described below.
Use the (Back) and (Forward) keys to navigate between USER PID and USER
STD. You will need to navigate past the four USER PID digits before the USER STD
is selected.
Use the (Up) and (Down) keys to increment or decrement the USER PID
value.
Use the (Up) and (Down) keys to toggle between the USER STD options.
Table 3.27 Represented Audio Format or Coding Standards
USER STD
MUS
AC-3
E-AC-3
Linear
AAC (ADTS)
AAC (LOAS)
HE-AAC
HE-AAC (ADTS)
3.14.5.1.1.3
Mode
This menu enables the viewing and editing of default decoder mode or behavior for
the associated audio decoder.
After selecting the Edit key, use the (Up) and (Down) keys to toggle between
DECODE and PASS-THRU.
EN/LZT 790 0005 R7A
AUDIO 1
4.7.1.2
Represented Audio Format or Coding Standard
MPEG-1 Audio Layer II or MPEG-2 Audio Layer II (sometimes called MUSICAM)
Dolby Digital (AC-3)
Dolby Digital Plus (DD+, E-AC-3 or Enhanced AC-3)
Linear PCM
Advancing Audio coding (AAC): Packaged in a streaming format called Audio Data
Transport Stream (ADTS)
Advancing Audio coding (AAC): Packaged in a streaming format called Low
Overhead Audio Stream (LOAS)
High-Efficiency Advanced Audio Coding (HE-AAC)
High-Efficiency Advanced Audio Coding (HE-AAC): Packaged in a streaming format
called Audio Data Transport Stream (ADTS)
AUDIO 1
4.7.1.3
|USER PID: 6553
|USER STD: MUS
|MODE: DECODE
|
Using the Equipment
3-255
Advertisement
Table of Contents
