Mdi Media Loss Rate (Max Value); I/P Port/ Use Input Ports; Auto Revert Delay; Redundancy Mode - Ericsson RX8000 Reference Manual

Using the Equipment
3.10.5.13.37

MDI Media Loss Rate (Max Value)

This menu allows the viewing and editing of the maximum MDI Media Loss Rate. To
access this menu from the above menu, press the  (Down) key.
This is the last of the Setup sub-menus. To return to the Setup main menu, press
the  (Back) key.
3.10.5.13.38

I/P Port/ Use Input Ports

This menu allows the viewing of the MDI Media Loss Rate (simply defined as the
number of lost or out-of-order media packets per second). Recommended maximum
acceptable average MLRs (media packet per second): SDTV 0.004, VOD 0.004,
HDTV 0.0005 and provides sub-menus for setting other parameters. To access this
menu from the Setup menu, press the  (Down) key.
Use the  (Up) and  (Down) keys to toggle between the Port 1 and Port 2.
3.10.5.13.39

Auto Revert Delay

This menu enables the viewing and editing of the time (in seconds) which the input
will delay before reverting to primary input upon regaining signal on the primary
input. To access this menu from the above menu, press the  (Forward) key.
Use the  (Up),  (Down),  (Forward) and  (Back) keys to enter the delay.
3.10.5.13.40

Redundancy Mode

This menu enables the viewing and editing of the Redundancy Mode. To access this
menu from the above menu, press the  (Down) key.
Use the  (Up) and  (Down) keys to toggle between the None, Fail Over and
Fail Over + Revert.
3-96
SETUP
3.2.4.7
I/P PORT
3.2.5
I/P PORT
3.2.5.1
I/P PORT
3.2.5.2
|MDI MEDIA LOSS RATE (MAX FACTOR)
|0.004
|USE INPUT PORTS
|Port 1
|AUTO REVERT DELAY
|00000
|REDUNDANCY MODE
|NONE
>
EN/LZT 790 0005 R7A