Station Id - Ericsson RX8000 Reference Manual

Using the Equipment
•
•
3.17.1.6.17

Station ID

By enabling Enable VANC and Station ID, the RX8200 can insert Station ID
extracted from VANC PES in the VANC space of the HD-SDI output. The line
number is signaled in the VANC PES on which this Station ID is inserted.
The RX8200 can also generate the Station ID information locally by using Transport
Stream information and service information. Additionally, if there is no information
provided in the Transport Stream, a manually specified Station ID name can be
used. If Enable VANC is selected, the Station ID will be inserted on the specified
HD VANC line. If Enable SDVANC is selected, the Station ID will be inserted on the
specified SD VANC line.
When there is Station ID data present in the VANC PES and Station ID insertion, is
enabled, the RX8200 will insert the Station ID from both of the above sources on
appropriate lines.
Figure 3.145 Decode > VBI-VANC > Station ID
•
•
•
•
•
3-294
Video Index Output Status – Displays the presence of Video Index information
in the VBI area of SD output video.
Video Index Insertion – Enables or disables Video Index insertion in the VBI
area of the SD output video.
DISABLE: Stops the insertion of Video Index data in to the output video
-
signal.
- ENABLE- VIDEO AR: Generates the Video Index information from the
aspect ratio and frame rate of an incoming video.
ENABLE – VBI PID: Extracts the Video Index information from the VBI PES.
-
VANC Station ID Output Status – Displays the presence of Station ID data in
the VANC space of the output video.
Enable Station ID – Enables or disables insertion of Station ID in the VANC
area of the HD output video.
VANC Station ID User Name – Allows manual input of a Station ID User Name.
HD VANC Station ID Insertion Line - Specifies the HD VANC line on which the
Station ID should be inserted (Default 8).
SD VANC Station ID Insertion Line - Specifies the SD VANC line on which the
Station ID should be inserted (Default 9).
EN/LZT 790 0005 R7A