Configuration For Audio Decoder Pairing - Ericsson RX8000 Reference Manual

Integrated receivers/decoders

Hide thumbs Also See for RX8000:

Table of Contents

The diagram above illustrates four Audio Decoders each configured to output two

channels and assigned to an audio output port. Where the decoded audio stream is

mono, it is output on both channels.

Figure 3.122 Configuration for Audio Decoder Pairing

The diagram above illustrates how Audio Decoder 1 has been paired with another

decoder to produce Audio Decoder 1L and 1R. Audio Decoder 1L and 1R are then

configured to output one channel each. This allows two separate audio streams to

be decoded separately but paired together to provide a dual-mono output on the

associated audio output port. Where the decoded audio stream is stereo, it will be

down-mixed to a single mono channel.

Note: In this mode there will only ever be eight output channels after enabling the

EN/LZT 790 0005 R7A

RX8200/SWO/4AUD license.

Using the Equipment