Table of Contents
Advertisement
3.17.3.6
Subtitle Control
Figure 3.36 Decode > Subtitles > Subtitle Control
•
•
•
Table 3.48 Subtitle Scale Factors When Using NO SCALING
Subtitle Type
DVB – HD subtitles
(DDS present)
DVB – SD subtitles
(No DDS present)
Teletext – HD video
Teletext – SD video
* RX8200 No High Quality Down Conversion card fitted.
EN/LZT 790 0005 R7A
Enable DVB Subtitles – Enables or disables insertion of DVB Subtitles on the
output Video.
Enable Teletext Subtitles – Enables or disables conversion of the Teletext
stream and generate OSD subtitles to the output video.
Scale – This menu allows the size of the subtitle graphics to be increased.
Available Scaling options are.
-
NO SCALING – This is the default value after factory reset. The actual size
depends on the type of subtitles and Video Output Mode. The following table
defines how the default size is derived:
-
SCALING 1, 2, 3, 4, 5, 6 – There are 6 user selectable scale values
available. Each of these will increase the size of the default subtitle size
which will depend on Scale selection, the type of subtitles and Video Output
Mode selected.
Video Output Mode
AUTO, 1080i or 1080p
SD*
720p
AUTO, SD*, 1080i, 720p or
1080p
AUTO, 1080i or 1080p
SD*
720p
AUTO or SD*
1080i or 1080p
720p
Using the Equipment
Default Size
As per stream
Size reduced by 46%
Size reduced by 33%
As per stream
Size increased by 87%
As per stream
Size increased by 25%
As per stream
Size increased by 87%
Size increased by 25%
3-309
Advertisement
Table of Contents
