Brandnet; Vitc - Ericsson RX8000 Reference Manual

Using the Equipment
3.17.1.6.13

Brandnet

ABC uses a proprietary waveform for transmitting data to their affiliates. A total of 22
or 44 bits are carried by this waveform. This is only present for NTSC standard
video on line 18 of field 2.
Figure 3.141 Decode > VBI-VANC > Brandnet
•
•
•
3.17.1.6.14

VITC

For the SD video, the RX8000 can insert the Vertical Interval Timecode (VITC)
extracted either from video User-Data or VBI PES.
For the HD video, the RX8000 can insert the VITC in the VANC space of the HD
output video extracted from VANC PES by enabling the Enable VANC option.
Figure 3.142 Decode > VBI-VANC > VITC
•
3-292
Brandnet Stream Status – Displays the presence of Brandnet data in the
incoming VBI PES stream.
Brandnet Output Status – Displays the presence of Brandnet data in the VBI
space of the output video.
Brandnet Insertion – Enables or disables insertion of Brandnet data in to the
VBI of the output signal.
VITC Insertion – Provides an option to enable or disable Vertical Interval
Timecode insertion in the VANC and/or VBI of the output video. The following
options are available:
- DISABLE: Stops insertion of VITC data
- VIDEO: Enables insertion of VITC data in to the video output signal where
the VITC data is sourced from the video User-Data (GOP).
EN/LZT 790 0005 R7A