Table of Contents
Advertisement
Using the Equipment
The transport stream after this stage will be routed to the ASI output as a single
stream. The transport stream is also be routed IP Output module as a single stream
or manipulated by the Service Splitting feature.
3.19.2.6
Configuration
From the Output > Filter page of the web browser interface, the Service Filter
Mode must be set to Single Service.
3.19.2.6.1
Service Selection
Figure 3.171 Services Web Page Showing the Service Control Table
Click the Service Plus tab. To select a service to be filtered, tick the Filter check box
from the desired service row. Then, click Apply Changes.
To select a different service, just tick the Filter check box from another service
3.19.2.6.2
PID Information
A pop up table is shown to the user when the mouse is over the Details hyperlink.
By clicking that link, the PID remap sub-table will be shown with detailed information
about the components of that service.
3.19.2.6.3
Scrambled Service
If the service is scrambled it can also be descrambled on the filtered output transport
stream. This is achieved by selecting the Decrypt check box in addition.
3-358
row.
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
