Table of Contents
Advertisement
Using the Equipment
•
•
•
•
•
•
•
•
Advanced
•
•
•
•
•
3.10.6.8
Front Panel Interface
3.10.6.8.1
Input Alarm Status
This menu displays the current card alarm.
3-104
MPEG Alert Status – This provides the MPEG level status of the detected
Transport Stream within the G.703 Card, this is the status of the de-
encapsulation form G.703 to
-
NO MPEG ALERTS ACTIVE
-
OUT OF REGULATION
-
RS THRESHOLD
-
SYNC LOSS
Physical Alert Status – Displays the current status of the physical connection,
this can have the values:
-
NO PHYSICAL ALERTS ACTIVE
-
LOSS OF SIGNAL
-
PARITY THRESHOLD
Card Alert Status – Displays the current status of the G.703 Card.
TS Packet Length – Displays the length of the packets used in the Transport
Stream.
Deinterleaver – Checking this box enables the Deinterleaver function.
Reed-Solomon – Checking this box enables the Reed-Solomon function.
Derandomizer – Checking this box enables the Derandomizer function.
Randomizer – Displays the current status of the G.703 card randomizer
function.
Mode – Enables the selection of the input mode from a drop-down menu.
Sync Cnt to Lock – Enables the user to input an appropriate value of sync
packets before lock is indicated.
Sync Miss Limit – Enables the user to input an appropriate value of missing
sync packets before loss of lock is indicated
Destuffing – Checking this box enables the destuffing function within the card,
this will remove all of the stuffing packets within the stream.
Man Pkt Length Ctrl – Checking this box enables this function to manually
define the length of the packets within the G.703 stream.
MPEG.
This can have the following values:
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
