The fields that can be configured are described below:
Parameter
Description
VLAN Name
Enter the pre-configured VLAN name to create as an 802.1X guest VLAN.
Port
Set the ports to be enabled for the 802.1X guest VLAN. Click the All button to select all the ports.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry based on the information entered.
Authenticator State
This window is used to display the authenticator state.
To view this window, click Security > 802.1X > Authenticator State as shown below:
The fields that can be configured are described below:
Parameter
Port
Click the Find button to locate a specific entry based on the information entered.
Click the Refresh button to refresh the display table so that new entries will appear.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings window
before initializing ports. Information in this window cannot be viewed before enabling the authentication
mode to either Port-based or MAC-based.
Authenticator Statistics
This window is used to display the authenticator statistics information.
To view this window, click Security > 802.1X > Authenticator Statistics as shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 8-13 Guest VLAN Settings window
Figure 8-14 Authenticator State window
Description
Select a port to be displayed.
214