Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
Parameter
Dampening State
Half Life (1-45)
Reuse (1-20000)
Suppress (1-20000)
Max Suppress Time
(1-255)
Un Reachability Half
Life (1-45)
Route Map Action
Route Map Name
Action
IP Address
Netmask
Click the Apply button to accept the changes made for each individual section.
BGP Peer Group Settings
This window is used to create or delete a Border Gateway Protocol (BGP) neighbor.
To view the following window, click L3 Features > BGP > BGP Peer Group Settings, as shown below:
The fields that can be configured are described below:
Parameter
Peer Group Name
Action
IP Address
Description
Use the drop-down menu to enable or disable the BGP dampening function's state.
Enter the time (in minutes) after which the penalty of the reachable routes will be
down, by half. The default setting is 15 minutes.
Enter a reuse value. If the penalty for a flapping route decreases enough to fall below
this value, the route is unsuppressed. The default setting is 750.
Enter a suppress value. A route is suppressed when its penalty exceeds this limit.
The default setting is 2000.
Enter the maximum time (in minutes) a route can be suppressed. The default setting
is 60 minutes.
Enter the time (in minutes) after which the penalty of the unreachable routes will be
down, by half. The default setting is 15 minutes.
Use the drop-down menu to select between Route Map and Clear Route Map. Route
Map sets the dampening running configuration while Clear Route Map withdraws the
route map configuration.
Enter a route map name to be set or withdrawn. The default value is null.
Use the drop-down menu to clear the IP or Network address route dampening
information stored in the routing table.
Enter an IPv4 address to clear the dampening information.
Enter the netmask to clear the dampening information.
Figure 5-117 BGP Peer Group Settings window
Description
Enter the name of the BGP peer group.
Choose among None, Add, or Delete. None is the default.
Enter the IP address to be added or deleted.
236
Advertisement
Table of Contents
