Table of Contents
Advertisement
®
xStack
Click the View All Entries button to display all the existing entries.
Click the Clear All Entries button to remove all the entries listed in the table.
Click the Add to Static MAC table button to add the specific entry to the Static MAC table.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
ARP & FDB Table
On this page the user can find the ARP and FDB table parameters.
To view the following window, click L2 Features > FDB > ARP & FDB Table, as shown below:
The fields that can be configured are described below:
Parameter
Port
MAC Address
IP Address
Click the Find by Port button to locate a specific entry based on the port number selected.
Click the Find by MAC button to locate a specific entry based on the MAC address entered.
Click the Find by IP Address button to locate a specific entry based on the IP address entered.
Click the View All Entries button to display all the existing entries.
Click the Add to IP MAC Port Binding Table to add the specific entry to the IP MAC Port Binding Table.
L2 Multicast Control
IGMP Proxy
Based on IGMP forwarding, the IGMP proxy runs the host part of IGMP on the upstream and router part of IGMP on
the downstream, and replicates multicast traffic across VLANs on devices such as the edge boxes. It reduces the
number of the IGMP control packets transmitted to the core network.
IGMP Proxy Settings
Users can configure the IGMP proxy state and IGMP proxy upstream interface in this page.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Proxy > IGMP Proxy Settings, as
shown below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 5-46 ARP & FDB Table window
Description
Here the user can select the port number to use for this configuration.
Here the user can enter the MAC address to use for this configuration.
Here the user can enter the IP address the use for this configuration.
111
Advertisement
Table of Contents
