Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
Port
VLAN Name
VID List
MAC Address
Security
Click the Find button to locate a specific entry based on the information entered.
Click the Clear Dynamic Entries button to delete all dynamic entries of the address table.
Click the View All Entries button to display all the existing entries.
Click the Clear All Entries button to remove all the entries listed in the table.
Click the Add to Static MAC table button to add the specific entry to the Static MAC table.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
ARP & FDB Table
On this page the user can find the ARP and FDB table parameters.
To view the following window, click L2 Features > FDB > ARP & FDB Table, as show below:
Figure 4-48 MAC Address Table window
Description
Select the unit you want to configure.
The port to which the MAC address below corresponds.
Enter a VLAN Name for the forwarding table to be browsed by.
Enter a list of VLAN for the forwarding table to be browsed by.
Enter a MAC address for the forwarding table to be browsed by.
Tick the check box to diaplsy the FDB entries that are created by the security
module.
Figure 4-49 ARP & FDB Table window
101
Advertisement
Table of Contents
