Call Features; Call Features Table (Star Code) - Grandstream Networks HandyTone-486 User Manual

HandyTone-486 User Manual
To make a PSTN call, press the PSTN access code (*00 by default, or any number configured in web
configuration page) to switch to PSTN line and get a dial tone, then dial the PSTN number.
When HandyTone-486 is out of power, it will function as a jack. User can use the same analog phone
for PSTN calls.
5.3

Call Features

5.3.1

Call Features Table (star code)

Following table shows the call features (* code) of HandyTone-486.
Key
*23
*87
*30
*31
*67
*82
*50
*51
*70
*71
*72
*73
*90
*91
*92
*93
Flash/Hook
Call Features
3-way conference
Blind Transfer
Block CallerID (for all-config change)
Send CallerID (for all-config change)
Block CallerID (per call)
Send CallerID (per call)
Disable Call Waiting (for all-config change)
Enable Call Waiting (for all-config change)
Disable Call Waiting. (Per Call)
Enable Call Waiting (Per Call)
Unconditional Call Forward.
To use this feature, dial "*72", wait for the dial tone. Then dial
the forward number ended with #, wait for dial tone, hang up.
Cancel Unconditional Call Forward
To cancel "Unconditional Call Forward", dial "*73" and get the
dial tone, then hang up.
Busy Call Forward
To use this feature, dial "*90", wait for the dial tone. Then dial
the forward number ended with #, wait for dial tone, hang up.
Cancel Busy Call Forward
To cancel "Busy Call Forward", dial "*91" and get the dial
tone, then hang up
Delayed Call Forward
To use this feature, dial "*92", wait for the dial tone. Then dial
the forward number ended with #, wait for dial tone, hang up.
Cancel Delayed Call Forward
To cancel this Forward, dial "*93" and get the dial tone, then
hang up
When in conversation, this action will switch to the new
incoming call if user heard the call waiting sound.
When in conversation and no incoming call heard, this action
will switch to a new channel for a new call.
15
Grandstream Networks, Inc.