Table of Contents
Advertisement
T
2: D
ABLE
EFINITIONS OF THE
Power LED
Indicates Power. Remains ON when Power is connected and turned ON.
WAN LED
Indicates LAN (or WAN) port activity.
Indicates PC (or LAN) port activity.
LAN LED
PHONE1 /
Indicate status of the respective FXS Ports-PHONE1 / PHONE2 on the back
PHONE2 LED
panel
NOTE: All LEDs display green when ON.
C
Y
ATA
ONFIGURE
OUR
The HT–502 is easy to configure using the embedded GUI pages and the following five (5) steps.
F
C
IVE EASY STEPS TO
ONFIGURE THE
1. Connect a standard touch-tone analog telephone (or fax machine) to first FXS port.
2. Connect another standard touch-tone analog telephone (or fax machine) to second FXS port.
3. Insert the Ethernet cable into the WAN port of HT–502 and connect the other end of the Ethernet
cable to an uplink port (a router or a modem, etc.)
4. Connect a PC to the LAN port of HT–502.
5. Insert the power adapter into the HT–502 and connect it to a wall outlet.
F
2: C
IGURE
ONFIGURING THE
Analog Phone
Cordless Phone
F
Grandstream Networks, Inc.
HT-502 LED
S
Busy - ON (Solid Green)
Available - OFF
HT–502
HT–502
Internet ADSL/Cable
Modem Ethernet
FXS
HT-502 User Manual
Firmware 1.0.0.29
WAN
FXS
LAN
Analog Phone
Cordless Phone
F
Page 6 of 31
Last Updated: 01/2007
Advertisement
Table of Contents
