Printing Area; Head Height Adjustment - Oce CS9360 User Manual

4.1.3

Printing area

The printable area of this printer is as follows.
4.1.4

Head height adjustment

Printing with high printing rate or using strongly-curved media can cause print heads to rub.
Changing the distance from the print head surface to media(head height) may allow you to avoid head
rub.
Head height can be changed to two levels.
When raising the print head
NOTE
If the head height adjustment lever is raised, high print quality is not guaranteed.

Do not open the front cover or change the head height during printing.

If the head height is changed, the alignment will be changed and high print quality will not
be guaranteed.
Step 1:
Open the front cover.
1
N°.
1
d
Printable Area
Front cover
c
b
a
Name
4-72
CS9360 User's Guide
a=Max. 15mm
b=5mm to 25mm
c=5mm
d=5mm to 25mm