Table of Contents
Advertisement
Océ | Ink System
Cleaning Solution/Fluid
2.1.2
The cleaning solution/fluid (see Figure 2-2) is used to supply and preserve the capping
station foam pads during operation of the printer. The cleaning solution/fluid rides on a
level sensing device to detect when it requires attention. When notification is received from
the printer, the operator must replace or refill the cleaning solution/fluid container located
on the ink supply tray.
Waste Container
2.1.3
Anytime you access the ink-supply doors, check the waste container level. The waste
container rides on a level sensing device to detect when it requires attention. If the waste
container (see Figure 2-3) appears full or the printer control panel is signaling that the
container requires emptying, then do so in accordance with state and local laws or in
accordance with the MSDS sheets.
2-2
Figure 2-2 Cleaning Solution/Fluid
Figure 2-3 Waste Bottle
Advertisement
Table of Contents
