Monthly Maintenance; Replacing The Wipers - Oce CS9090 User Manual

7.2.3 Monthly Maintenance

7.2.3.1

Replacing the wipers

Power ON the printer and go to the "WiperClean-Menu". This will cause the unlocking of the
Step 1 :
carriage.
Slide the carriage to the left side of the machine.
Step 2 :
Remove the old wipers with a pair of tweezers
Step 3 :
Before inserting a new wiper, moisten the wiper with Low Solvent Cleaning Liquid.
Step 4 :
Insert the moistened wiper with a pair of tweezers.
Step 5 :
Close the front cover and press the [ENTER] key. The head will cap in.
Step 6 :
Notes
•
Be careful not to break the lips of the wiper arm while installing the wipers.
•
Do not touch the wipers with your bare hands to avoid fat or dirt get in contact with the wipers and
automatically the nozzle plate. Use a pair of tweezers to avoid this. Clean wipers with appropriate
cleaning liquid in case of dirt.
AP-75036 - Revision 1.3 – 20/03/06
Be sure to insert the wiper
correctly as shown below:
When standing in front of
the machine.
155
Be sure that the wiper clicks in the wiper
holder!
User's Guide CS9000 series
Chapter 7: Maintenance