Settings On The Océ Plotwave 900 Scanner Operator Panel - Oce PlotWave 900 User Manual

Printer, scanner, copier
Hide thumbs Also See for PlotWave 900:
Table of Contents

Advertisement

Settings on the Océ PlotWave 900 scanner operator panel
Introduction
When job templates are enabled in the Océ Express WebTools, the job templates are
displayed when the scanner is started.
The custom section gives access to the settings you defined in Océ Express WebTools.
This contains a number of settings that are directly accessible. The key operator defines
the custom section in the Océ Express WebTools.
How to make settings
Select a template (only applies when job templates on the scanner operator panel are en-
1.
abled in the Océ Express WebTools).
Press one of the Section keys to activate the desired menu.
2.
Note:
The active menu is moved downward slightly to visually separate it from the other menus.
Apart from that, a shadow highlighting effect is used for extra highlighting.
Press the Selection key to select the appropriate card. You can switch cards (from bottom
3.
to top) by pressing the key again.
Note:
Here, too, the active card is visually separated from the other cards and given a shadow
highlighting effect for extra highlighting.
Select the desired function values in one of the following ways:
4.
Simple (non-numeric) selection: press the Function key to activate the desired (non-
numeric) value. The selected value is preceded by a 'o' symbol.
Long list selection: if you want to select a value from a list of options that cannot be
fully displayed on the panel, you first activate the selection triangles next to the specified
option (the dotted line around this selection changes into a solid line and the selection
triangles are no longer dimmed), which indicate that there are additional options
available, and then select one of the non-displayed values with the arrow keys.
Numeric selection: activate the selection triangles and select the desired value with the
arrow keys or with the numeric keys.
A combination of simple selection and numeric selection is also possible.
Settings on the Océ PlotWave 900 scanner operator panel
Chapter 5 - Use the Océ PlotWave 900 scanner to copy
155

Advertisement

Table of Contents
loading

Table of Contents