Table of Contents
Advertisement
I15007_en_02
Configuring the mGuard pci² SD
•
Enter the following address into the browser: https://1.1.1.1/
The connection to the mGuard pci² SD is established. (If not, see Section 5.5.2).
A security message indicating a possible invalid/not trusted certificate is displayed. This
message results from the use of an mGuard certificate from Innominate that is not yet known
to the browser but necessary for encryption of the communication.
•
Acknowledge this message with "Accept this certificate always/temporarily" (Mozilla
Firefox), "Continue loading this website" (Internet Explorer), "Continue anyway"
(Google Chrome).
•
Click "Yes" to acknowledge the security alert.
The login window is displayed.
Figure 5-4
Login
•
To log in, enter the preset user name and password (please note these settings are
case-sensitive):
User Name:
admin
Password:
mGuard
To configure the device, make the desired or necessary settings on the individual pages of
the mGuard web interface.
For security reasons, we recommend you change the default root and administrator pass-
words during initial configuration (in the web interface under "Authentication >> Adminis-
trative Users").
mGuard pci² SD
Innominate Security Technologies
97
Advertisement
Table of Contents
