Innominate mGuard Reference Manual page 203

Boot options
I15007_en_02
Boot firmware A
Start the primary firmware version on the device (A). The default setting: it is applied if
the user does not intervene during startup.
Boot firmware B
Not supported by the current firmware version.
Check the file system(s) of firmware A
If required, checks and repairs all firmware file systems.
This menu item is only to be used in special cases when the user has the appropriate
knowledge or upon instruction from the dealer support team. The mGuard firmware
checks and repairs the file systems, if required, even during the normal startup process.
The firmware uses its file systems in a highly robust manner when the mass storage de-
vice cache is switched off, so that there is not usually any need for repairs.
Check the file system(s) of firmware B
Not supported by the current firmware version.
Start rescue procedure via DHCP/BootP+TFTP
Start rescue procedure from CD/DVD
Start rescue procedure from USB mass storage
"Restart, recovery procedure, and flashing the firmware" on page 209
mGuard centerport
Innominate Security Technologies
203