Technical Data - Innominate mGuard Reference Manual

Hardware properties
Platform
Network interfaces
Other interfaces
Drives
Redundancy options
Power supply
Power consumption
Humidity range
Degree of protection
Temperature range
Dimensions (H x W x D)
Weight
Firmware and power values
Firmware compatibility
Data throughput (router | firewall)
Hardware-based encryption
Encrypted VPN throughput (AES-256)
Management support
Diagnostics
Other
Conformance
I15007_en_02
10.8

Technical data

mGuard blade /266 | mGuard blade /533
Intel network processor
either with 533 MHz or 266 MHz clocking
1 LAN port | 1 WAN port
Ethernet IEEE 802.3 10/100 Base TX |
RJ45 | full duplex | auto MDIX
Serial RS-232, RJ11 socket
–
Depending on the firmware used
Via bladebase: 100 V AC ... 240 V AC at 50/60 Hz
blade: 3 W, typical
bladebase: 42 W, typical
10% ... 95% during operation, non-condensing
IP20
+5°C ... +40°C (operation)
-20°C ... +70°C (storage)
blade: 100 x 26 x 160 mm
bladebase: 133 x 483 x 235 mm (3 HU)
blade: 245 g | bladepack: 7.7 kg
mGuard v5.0 or later: Innominate recommends firmware version 6.x or 7.x to
be used with the latest patch releases;
For the scope of functions, please refer to the relevant firmware data sheet.
99 Mbps bidirectional | 99 Mbps bidirectional
DES | 3DES | AES-128/192/256
35 Mbps (blade /256) bidirectional | 70 Mbps (blade /533) bidirectional
Web GUI (HTTPS) | command line interface (SSH) | SNMP v1/2/3 | central
device management software
LEDs (2 x LAN, 2 x WAN in combination for boot process, system error, Ether-
net status, Recovery mode) | Log File | Remote Syslog
CE | FCC
mGuard blade
Innominate Security Technologies
195