Startup - Innominate mGuard Reference Manual

I15007_en_02
12.2

Startup

12.2.1 Safety notes
To ensure correct operation and the safety of the environment and of personnel, the
mGuard must be installed, operated, and maintained correctly.
NOTE: Risk of material damage due to incorrect wiring
Only connect the mGuard network ports to LAN installations. Some telecommunications
connections also use RJ45 sockets; these must not be connected to the RJ45 sockets of
the mGuard.
General notes regarding usage
NOTE: Select suitable ambient conditions
– Ambient temperature:
0°C ... +55°C
– Maximum humidity, non-condensing:
10% ... 95%
To avoid overheating, do not expose the mGuard to direct sunlight or other heat sources.
NOTE: Cleaning
Clean the device housing with a soft cloth. Do not use aggressive solvents.
12.2.2 Checking the scope of supply
Before startup, check the scope of supply to ensure nothing is missing.
The scope of supply includes:
– mGuard industrial rs
– Package slip
– Terminal block for the power supply connection (inserted)
– Terminal block for the signal contact, button, and an optional ISDN or telephone con-
nection
– 2 cover caps for RJ45 sockets
mGuard industrial rs
Innominate Security Technologies
217