Technical Data - Innominate mGuard Reference Manual

Hardware properties
Platform
Network interfaces
Other interfaces
Drives
Redundancy options
Power supply
Power consumption
Humidity range
Degree of protection
Temperature range
Dimensions (H x W x D)
Weight
Firmware and power values
Firmware compatibility
Data throughput (router | firewall)
Hardware-based encryption
Encrypted VPN throughput (AES-256)
Management support
Diagnostics
Other
Conformance
I15007_en_02
13.9

Technical data

Intel network processor
with 533 MHz clocking
1 LAN port | 1 WAN port
Ethernet IEEE 802.3 10/100 Base TX |
RJ45 | full duplex | auto MDIX |
Optional 100 Base FX (F0)
Serial RS-232, RJ11 socket | USB
–
Depending on the firmware used
24 V DC | max. 300 mA | PELV/SELV | redundant | -25% ... +25% voltage
range
max. 7.2 W at 24 V
10% ... 95% during operation, non-condensing
IP20
0°C ... +60°C (operation)
-40°C ... +80°C (storage)
131 x 47 x 111 mm
340 g
mGuard v5.0 or later: Innominate recommends firmware version 6.x or 7.x to
be used with the latest patch releases;
For the scope of functions, please refer to the relevant firmware data sheet.
99 Mbps bidirectional | 99 Mbps bidirectional
DES | 3DES | AES-128/192/256
70 Mbps bidirectional
Web GUI (HTTPS) | command line interface (SSH) | SNMP v1/2/3 | central
device management software
LEDs (P1, P2, Status, Fault, LAN, WAN, V.24) | signal contact (24 V, 1 A) |
Log File | Remote Syslog
CE | FCC | UL 508 | GL
EAGLE mGuard
Innominate Security Technologies
253