Innominate mGuard Reference Manual page 235

Hardware properties
Platform
Network interfaces
Other interfaces
Drives
Redundancy options
Power supply
Power consumption
Humidity range
Degree of protection
Temperature range
Dimensions (H x W x D)
Weight
Firmware and power values
Firmware compatibility
Data throughput (router | firewall)
Hardware-based encryption
Encrypted VPN throughput (AES-256)
Management support
Diagnostics
Other
Conformance
I15007_en_02
12.9 Technical data
Intel network processor
with 533 MHz clocking
1 LAN port | 1 WAN port
Ethernet IEEE 802.3 10/100 Base TX |
RJ45 | full duplex | auto MDIX
Serial RS-232, RJ11 socket |
Optional analog modem | optional ISDN-TA
–
Depending on the firmware used
24 V DC | 170 mA | SELV | redundant | voltage range 9 V - 36 V
4.1 W, typical
10% ... 95% during operation, non-condensing
IP20
0°C ... +55°C (operation)
-20°C ... +70°C (storage)
100 x 45 x 112 mm
250 g
mGuard v5.0 or later: Innominate recommends firmware version 6.x or 7.x to
be used with the latest patch releases;
For the scope of functions, please refer to the relevant firmware data sheet.
99 Mbps bidirectional | 99 Mbps bidirectional
DES | 3DES | AES-128/192/256
70 Mbps bidirectional
Web GUI (HTTPS) | command line interface (SSH) | SNMP v1/2/3 | central
device management software | optional key switch (VPN)
LEDs (P1, P2, Modem, Fault, State, Error, LAN, WAN) | signal contact (SELV)
┴
| service contacts ( , CMD, ACK) | Log-File | Remote Syslog
CE | FCC | UL 508
mGuard industrial rs
Innominate Security Technologies
235