Startup - Innominate mGuard Reference Manual

Personnel
I15007_en_02
7.2

Startup

7.2.1 Safety notes
Installation, startup and maintenance of the product may only be performed by qualified
specialist personnel who have been authorized for this by the operator. Specialist personnel
must have read and understood the instructions in this manual and act accordingly.
NOTE: Risk of material damage due to incorrect wiring
Only connect the mGuard network ports to LAN installations. Some telecommunications
connections also use RJ45 sockets; these must not be connected to the RJ45 sockets of
the mGuard.
General notes regarding usage
NOTE: Select suitable ambient conditions
– Ambient temperature:
0°C ... +45°C
– Maximum humidity, non-condensing:
20% ... 90%
To avoid overheating, do not expose the mGuard to direct sunlight or other heat sources.
NOTE: Risk of material damage caused by cleaning agents
Clean the device housing with a soft cloth. Do not use aggressive solvents.
7.2.2 Checking the scope of supply
Before startup, check the scope of supply to ensure nothing is missing.
The scope of supply includes:
– mGuard centerport²
– Package slip
– 2 x AC mains connecting cables
– 19'' server rails/telescopic rails (2 x short, 2 x long)
– Screw set
– Installation instructions for 19'' frame/industrial cabinet (Quickrails installation instruc-
tions)
mGuard centerport²
Innominate Security Technologies
127