mGuard rs4000/rs2000
14
Innominate Security Technologies
1.2
Startup
1.2.1
Safety notes
To ensure correct operation and the safety of the environment and of personnel, the
mGuard must be installed, operated, and maintained correctly.
NOTE: Risk of material damage due to incorrect wiring
Only connect the mGuard network ports to LAN installations. Some telecommunications
connections also use RJ45 sockets; these must not be connected to the RJ45 sockets of
the mGuard.
General notes regarding usage
NOTE: Select suitable ambient conditions
–
Ambient temperature:
-20°C ... +60°C
–
Maximum humidity, non-condensing
5% ... 95%
To avoid overheating, do not expose the mGuard to direct sunlight or other heat sources.
NOTE: Cleaning
Clean the device housing with a soft cloth. Do not use aggressive solvents.
1.2.2
Checking the scope of supply
Before startup, check the scope of supply to ensure nothing is missing.
The scope of supply includes:
–
The device
–
Package slip
–
Plug-in screw terminal blocks for the power supply connection and inputs/outputs (in-
serted)
I15007_en_02