Innominate mGuard Reference Manual page 124

mGuard smart²/smart
Hardware properties
Platform
Network interfaces
Other interfaces
Drives
Redundancy options
Power supply
Power consumption
Temperature range
Humidity range
Degree of protection
Dimensions (H x W x D)
Weight
Firmware and power values
Firmware compatibility
Data throughput (router | firewall)
Hardware-based encryption
Encrypted VPN throughput (AES-256)
Management support
Diagnostics
Other
Conformance
124
Innominate Security Technologies
6.9.1 mGuard smart
mGuard smart /266 | mGuard smart /533
Intel network processor
either with 533 MHz or 266 MHz clocking
1 LAN port | 1 WAN port
Ethernet IEEE 802.3 10/100 Base TX |
RJ45 | full duplex | auto MDIX
–
–
Depending on the firmware used
Via USB interface (5 V at 500 mA)
Optional: external power supply unit (110 V ... 230 V)
2.5 W, maximum
0°C ... +40°C (operation)
-20°C ... +70°C (storage)
20% ... 90% during operation, non-condensing
IP30
27 x 77 x 115 mm
158 g
mGuard v5.0 or later: Innominate recommends firmware version 6.x or 7.x to
be used with the latest patch releases;
For the scope of functions, please refer to the relevant firmware data sheet.
99 Mbps bidirectional | 99 Mbps bidirectional
DES | 3DES | AES-128/192/256
35 Mbps (smart/256) bidirectional | 70 Mbps (smart/533) bidirectional
Web GUI (HTTPS) | command line interface (SSH) | SNMP v1/2/3 | central
device management software
LEDs (3 LEDs in combination for boot process, heartbeat, system error,
Ethernet status, Recovery mode) | Log File | Remote Syslog
CE | FCC
I15007_en_02