Innominate mGuard Reference Manual page 202

mGuard centerport
202
Innominate Security Technologies
11.3.3 Front flap
The safety lock on the front flap enables the front flap to be securely locked, so that access
is refused to the drives, reset button, and ON/OFF switch. Ensure that you keep safe hold
of the two keys providedHousing
The mGuard centerport housing is from Kontron and is referred to as the KISS 2U platform.
Visit www.kontron.de for more information on the following:
– Mounting in a 19" industrial cabinet
– Mounting of housing feet
– Removing the 19" angled connector from the device
– Maintenance and care
11.3.4 Starting (booting) mGuard centerport
• Press the ON/OFF button
The mGuard centerport boots the firmware and is ready to operate.
11.3.4.1 Boot options - when monitor and keyboard are connected
If a monitor and a keyboard are connected to the device, the following options are available:
– Following switch-on
– Following a restart
– After pressing the Reset button
If the boot messages from the BIOS are initially displayed on the monitor, the
mGuard centerport boot menu is shown for a few seconds.
If the boot menu is displayed for a longer period of time, preferably press one of the following
direction keys: , ,
Figure 11-5 mGuard centerport boot menu
To select and apply one of the boot options, proceed as follows:
1. Select one of the displayed options with the direction keys
2. Then press the Enter button.
or .
or .
I15007_en_02