Operating Elements And Leds - Innominate mGuard Reference Manual

EAGLE mGuard
Power supply 1 (P1)
Power supply 2 (P2)
Link status/data 1 (LAN)
Link status/data 2 (WAN)
Table 13-2 LEDs on the EAGLE mGuard
LED State
P1, P2 Green On
STATUS Green On
Flash-
ing
FAULT Red On
LS/DA 1/2 Green On
V.24
Yel- Flash-
low ing
238
Innominate Security Technologies
13.1

Operating elements and LEDs

Reset button
USB
Serial V.24
Figure 13-2 Operating elements and LEDs on the EAGLE mGuard
Meaning
Power supply 1 or 2 is active.
The mGuard is ready.
The mGuard is starting.
The signal contact is open due to an error (see "Signal contact" on page 241).
Link present
Data transfer
FAULT
STATUS
Serial V.24
Ethernet LAN
Ethernet WAN
Ground connection
I15007_en_02