Innominate mGuard Reference Manual page 163

I15007_en_02
Router mode in Power-over-PCI mode
Figure 9-6 Power-over-PCI mode: Router mode
If the mGuard is in Router mode (or PPPoE or PPTP mode), the mGuard and the network
card connected to its LAN socket – installed in the same computer or another computer –
act as a separate network.
For the IP configuration of the network interface of the operating system for the computer in
which the network card is installed, this means that an IP address must be assigned to this
network interface that differs from the internal IP address of the mGuard (by default upon
delivery this is 192.168.1.1).
A third IP address is used for the interface of the mGuard to the WAN. It is used for connec-
tion to an external network (e.g., Internet).
mGuard pci
Network card
192.168.1.2
192.168.1.1
External IP
Innominate Security Technologies
163