Objective
Action
I15007_en_02
11.7
Restart, recovery procedure, and flashing the firm-
ware
For mGuard centerport, there is a reset key which can be used to perform a restart. The res-
cue procedure and therefore the reloading of mGuard firmware is initiated via the boot
menu.
Figure 11-7
Reset button
11.8
Performing a restart
The device is restarted with the configured settings.
•
Press the Reset button.
(Alternatively, disconnect the power supply and then connect it again.)
Reset button
Innominate Security Technologies
mGuard centerport
209