Configuration In Stealth Mode - Innominate mGuard Reference Manual

mGuard delta²
80
Innominate Security Technologies
4.5

Configuration in Stealth mode

On initial startup, the mGuard can be accessed via two addresses:
– https://192.168.1.1/ (see Page 81)
– https://1.1.1.1/ (see Page 81)
Alternatively, an IP address can be assigned via BootP (see "Assigning the IP address via
BootP" on page 82).
The mGuard can be accessed via https://192.168.1.1/ if the external network interface is not
connected on startup.
Computers can access the mGuard via https://1.1.1.1/ if they are directly or indirectly con-
nected to the LAN port of the mGuard. For this purpose, the mGuard with LAN port and
WAN port must be integrated in an operational network in which the default gateway can be
accessed via the WAN port.
– After access via IP address 192.168.1.1 and successful login, IP address
192.168.1.1 is set as a fixed management IP address.
– After access via IP address 1.1.1.1 or after IP address assignment via BootP, the FL
MGUARD can no longer be accessed via IP address 192.168.1.1.
I15007_en_02