I15007_en_02
9.2
Startup
9.2.1
Safety notes
To ensure correct operation and the safety of the environment and of personnel, the
mGuard must be installed, operated, and maintained correctly.
NOTE: Risk of material damage due to incorrect wiring
Only connect the mGuard network ports to LAN installations. Some telecommunications
connections also use RJ45 sockets; these must not be connected to the RJ45 sockets of
the mGuard.
General notes regarding usage
NOTE: Connection notes
–
A free PCI slot (3.3 V or 5 V) must be available on your PC when using the
mGuard pci.
–
Do not bend connecting cables. Only use the network plug for connection to a net-
work.
NOTE: Select suitable ambient conditions
–
Ambient temperature:
0°C ... +70°C
–
Maximum humidity, non-condensing:
20% ... 90%
To avoid overheating, do not expose the mGuard to direct sunlight or other heat sources.
NOTE: Cleaning
Clean the device housing with a soft cloth. Do not use aggressive solvents.
9.2.2
Checking the scope of supply
Before startup, check the scope of supply to ensure nothing is missing.
The scope of supply includes:
–
mGuard pci
–
Package slip
mGuard pci
Innominate Security Technologies
159