Restart, Recovery Procedure, And Flashing The Firmware - Innominate mGuard Reference Manual

mGuard pci² SD
Reset button
Objective
Action
104
Innominate Security Technologies
5.8 Restart, recovery procedure, and flashing the firm-
ware
The Reset button is used to set the device to one of the following states:
– Performing a restart
– Performing a recovery procedure
– Flashing the firmware/rescue procedure
Figure 5-6 Reset button
5.8.1 Performing a restart
The device is restarted with the configured settings.
• Press the Reset button until the STAT LED lights up orange.
• Alternatively, restart the computer that contains the mGuard pci card.
I15007_en_02