mGuard rs4000/rs2000 3G
60
Innominate Security Technologies
3.3.4
Antennas
To establish a mobile communication connection, a matching antenna must be connected
to the devices.
NOTE: Removing operator permissions
Operation of the wireless system is only permitted with accessories supplied by
Innominate. The use of other accessory components may invalidate the operating li-
cense.
You can find the approved accessories for this wireless system listed with the product at:
www.innominate.com.
We recommend combined mobile phone GPS antenna with omnidirectional characteristic,
antenna cable with SMA round plug (GSM/UMTS) and R-SMA round plug
(TC ANT MOBILE/GPS, 2903590 from Phoenix Contact).
In the case of the mGuard rs2000 3G, the WAN is only available via the mobile network,
as a WAN interface is not available. The mobile network function is preset. The
mGuard rs2000 3G can only be operated in Router mode.
Connecting antennas
GPS
Figure 3-5
Antenna connection
•
Connect a suitable antenna to the antenna connection.
Antenna connection
–
SMA for mobile communication (ANT)
–
RSMA (GPS)
•
If the bar graph indicates good or very good reception, affix the antenna (see "Bar
graph" on page 53).
ANT
I15007_en_02