I15007_en_02
10.2
Startup
10.2.1
Safety notes
To ensure correct operation and the safety of the environment and of personnel, the
mGuard must be installed, operated, and maintained correctly.
NOTE: Risk of material damage due to incorrect wiring
Only connect the mGuard network ports to LAN installations. Some telecommunications
connections also use RJ45 sockets; these must not be connected to the RJ45 sockets of
the mGuard.
General notes regarding usage
NOTE: Select suitable ambient conditions
–
Ambient temperature:
+5°C ... +40°C
–
Maximum humidity, non-condensing:
10% ... 95%
To avoid overheating, do not expose the mGuard to direct sunlight or other heat sources.
NOTE: Cleaning
Clean the device housing with a soft cloth. Do not use aggressive solvents.
10.2.2
Checking the scope of supply
Before startup, check the scope of supply to ensure nothing is missing.
The scope of supply includes:
–
Package slip
–
19" mGuard bladebase
–
An mGuard blade as the controller
–
Two power supply units
–
Two power cables
–
12 place holders
–
12 labeling plates M1 to M12
–
Screws for mounting the mGuard bladebase
mGuard blade
Innominate Security Technologies
183