Startup - Innominate mGuard Reference Manual

I15007_en_02
4.2

Startup

4.2.1 Safety notes
To ensure correct operation and the safety of the environment and of personnel, the
mGuard must be installed, operated, and maintained correctly.
NOTE: Risk of material damage due to incorrect wiring
Only connect the mGuard network ports to LAN installations. Some telecommunications
connections also use RJ45 sockets; these must not be connected to the RJ45 sockets of
the mGuard.
General notes regarding usage
NOTE: Select suitable ambient conditions
– Ambient temperature:
0°C ... +40°C
– Maximum humidity, non-condensing:
5% ... 95%
To avoid overheating, do not expose the mGuard to direct sunlight or other heat
sources.
NOTE: Cleaning
Clean the device housing with a soft cloth. Do not use aggressive solvents.
4.2.2 Checking the scope of supply
Before startup, check the scope of supply to ensure nothing is missing.
The scope of supply includes:
– mGuard delta²
– Package slip
– 12 V DC power supply including different country adapters
mGuard delta²
Innominate Security Technologies
77