Innominate mGuard Reference Manual page 35

Table 2-2 LEDs on the mGuard rs4000 Switch and mGuard rs2000 Switch [...]
LED State
Info2 Green
Info1 Green
WAN 1 Green
1
DMZ1 Green
2
LAN 1–4/5 Green
1
mGuard rs4000 Switch only
2
mGuard rs2000 Switch only
I15007_en_02
Meaning
On The configured VPN connections are established at output O1 or the firewall re-
cords defined at output O1 are activated.
Flashing The configured VPN connections are being established or aborted at output O1 or
the firewall rule records defined at output O1 are activated or deactivated.
On The configured VPN connections are established at output O2 or the firewall re-
cords defined at output O2 are activated.
Flashing The configured VPN connections are being established or aborted at output O2 or
the firewall rule records defined at output O2 are activated or deactivated.
On The LEDs are located in the sockets (10/100 and duplex LED)
On
Ethernet status. The LEDs indicate the status of the relevant port. As soon as the
device is connected to the relevant network, a continuous light indicates that there
On
is a connection to the network partner in the LAN, WAN or DMZ. When data pack-
ets are transmitted, the LED goes out briefly.
mGuard rs4000/rs2000 Switch
Innominate Security Technologies
35